The IROAD OBD cable is only compatible with IROAD and Thinkware dash cams.
Not compatible with Tesla vehicles.
The IROAD Power OBD-II cable can simply be plugged into the OBD terminal to enable parking recording with IROAD dash cams.
*IROAD "Electric" OBD-Power Cable is NOT compatible with Ford Mustang Mach-E. We recommend using a hardwiring kit instead.
INPUT VOLTAGE
DC 12V-15V
OUTPUT VOLTAGE
DC 12V-15V / Max 1.8A
LENGTH
3 Meters / 9.5 Feet
OPERATING TEMPERATURE
-40°C - 85°C / -40°F - 185°F
OVERCURRENT CUT-OFF
Min 3.4A
COUNTRY OF ORIGIN
South Korea
Parking mode is offered on most of the dash cams available at BlackboxMyCar. While it is important to protect your vehicle while driving, it is just as important to have your vehicle protected while it is parked. When the dash cam is in parking mode, footage will only be saved when there is an impact and/or motion. Parking mode can be enabled with a hardwiring kit or a battery pack.
For more information on parking mode, click here.
A hardwiring kit enables parking mode. It allows your dash cam to remain powered on even when the vehicle's ignition is turned off. Installation is a breeze as you will only need to find an accessory fuse, constant fuse, and a grounding point.
Most customers purchase the battery pack to avoid using the vehicle’s battery to power their dash cam. The battery pack is charged by either being hardwired into an accessory fuse or by being plugged into one of the vehicle's 12-volt cigarette sockets. We recommend the hardwiring the battery pack as it charges the battery pack quicker.
For more information on Battery Packs, click here.
On average, a 2-channel dash cam writes 16GB/hour and a 1-channel dash cam writes about 8GB/hour.
Click here to see all the memory cards we carry.
Accidents or events don't always happen at the front of the vehicle! Having a rear camera provides coverage for any events or accidents that may happen at the rear of the vehicle.
For more information on rear view cameras, click here.
An IR camera is designed to record the interior of the vehicle in low light conditions. This option is very popular among rideshare drivers.
For more information on why rideshare drivers need dash cams, click here.
A CPL filter attaches to the dash cam lens to eliminate lens flares, light reflections, and windshield glares.
For more information on CPL filters, click here.
Find the latest firmware and all downloadable content here.